Tormek AWT-250 Water Trough for T-7

Water trough for Tormek T-7 and older models

The AWT-250 Advanced Water Trough for T-7 has a greatly extended frame to keep your workbench free of water. It also comes with a built-in magnet that effectively traps steel particles while you sharpen and allows you to clean them off when you're done. A removable drip cover for long tools is also included.

Tormek AWT-250 - Advanced Water trough with water chute and magnet to suit T-7/2006

Why AWT-250 Advanced Water Trough for T-7?

• Built-in magnet that traps steel particles.
• Drip cover for long tools.
• Easy to mount.
• Fits the Tormek T-7, Tormek 2000 and older models with a 250 mm (9 7/8") grinding wheel.

Magnet traps steel particles

The AWT-250 Advanced Water Trough for T-7 has a built-in magnet that effectively traps steel particles while you're sharpening, keeping your grindstone cleaner and allowing it to cut more freely. These particles can otherwise be pressed into the surface layer of the stone and impair its abrasive properties. The steel particles are all collected at the magnet when you empty the water trough. It's easy to clean with a paper towel.

Drip cover for long tools

There's an extra drip cover for the really long tools that extend over the edge of the frame (such as long knives and planer blades). It's easy to fit on the edge and channels the water back to the trough. This will keep your sharpening cleaner.

The AWT-250 Advanced Water Trough for T-7 fits the Tormek T-7, Tormek 2000 and older models with a 250 mm (9 7/8") grinding wheel.